Having a faulty tap can be pretty frustrating, especially when it’s the basin tap, which is used multiple times a day. It is important to be able to address and troubleshoot common problems with these taps to get them working correctly again.
This blog post will provide troubleshooting tips for common problems with them so that you can be prepared to handle any issues that may arise. You will learn about the typical causes of these issues and the steps that should be taken to address the issue.
Basin taps can help you save time, money and a whole lot of frustration when it comes to dealing with such matters. So, if you’re ready to tackle the challenge of troubleshooting common problems with basin taps, read on and let this blog post be your guide.
1.Identify the cause of the issue
The first step in troubleshooting common problems with basin taps is to identify the cause of the issue. Carefully inspect the tap and check for any visible signs of damage or blockage, like broken or missing parts or calcium deposits. If there is a debris buildup, you may need to replace the tap or clean the filter. If the tap is still not working, you may need to check if there is a problem with the water supply. You can also contact your local plumber for professional assistance.
2.Check the flow of water through the tap
Check the flow of water through the tap by turning the handle to the open position. If the water flow is weak, the issue is likely to be with the aerator, which is a small fitting located at the end of the spout. Clean it out and, if necessary, replace it to ensure that the water pressure is back to normal.
3.Ensure the tap has been correctly installed
One of the most common issues with basin taps is poor installation. Before attempting to troubleshoot any other problems with your tap, you should first ensure that it has been correctly installed. To do this, check the manual provided with the tap and make sure that all fittings and components are securely attached and that the tap is firmly secured to the basin. If any parts appear loose or damaged, they should be replaced or tightened before attempting to use the tap.
4.Ensure the seals are correctly fitted
Fourth, ensure that the seals are correctly fitted. If the seals are not fitted properly, the tap will not be able to hold water and will leak. To check if the seals are correctly fitted, remove the tap and examine the seal. If the seal is not correctly fitted, replace it with a new one following the manufacturer’s instructions.
5.Clean and inspect the internal components of the tap
To properly clean and inspect the internal components of the basin tap, you will need to remove the tap handle and insert a hex wrench into the opening. Once the hex wrench is in place, you can rotate the tap counterclockwise to unscrew and remove the top of the tap. You will then be able to inspect the inner components of the tap for any signs of wear, damage, or clogs. To clean, use a damp cloth to clean the internal components, then reassemble the tap and test the functionality.
Conclusion
Basin taps can be tricky to repair and troubleshoot. Fortunately, there are some easy steps you can take to identify the issue and fix it quickly. From checking the water pressure to checking for airlocks, you can take a few simple steps to get your basin tap working again. With these tips and some patience, you’ll be able to get the most out of your basin tap and avoid any further issues.
